Troubleshooting method of automatic water pump controller- Taizhou Soyue Electronic Technology Co.Ltd

Troubleshooting method of automatic water pump controller

2022-06-02

The maintenance and inspection of the automatic water pump controller is an important part of the daily production and use of the automatic water pump controller. When the automatic water pump controller fails, we should check and judge it. The methods are as follows:

1. Observation method

Use sight, smell, touch. Sometimes, the damaged automatic water pump controller will discolor, blister or appear burnt spots; the burnt device will produce some special odor; the virtual soldering or desoldering can also be observed with the naked eye.

2. Substitution method

Prepare two automatic water pump controllers of the same model. Replace a good spare with the same component on the faulty machine to see if the fault is resolved.

3. percussion method

The so-called knock is to lightly knock the plug-in board or component with a small rubber hammer or other knocking object on the part that may cause a failure to see if it will cause an error or downtime.

4. Exclusion method

The method of judging the cause of the fault by plugging and unplugging some plug-in boards and devices in the machine. When the instrument returns to normal after a plug-in board or device is removed, it means that the fault occurs there.

Taizhou Soyue Electronic Technology Co.Ltd established in 2010, is a leading professional manufacturer for research,development

,production and sales of automatic pressure controls, float switches and accessories for water pump.

Our factoryis located in the beautiful seaside city,Taizhou,

Zhejiang, with a prosperous economy, convenient transportation and superiorenvironment.